LPG Cylinder Electrostatic Spraying Line

Hangzhou Dongbei Mechanical And Electrical Equipment Co., Ltd. is one of the leading manufacturers and suppliers of lpg cylinder electrostatic spraying line in China, also supports customized service. If you're going to wholesale bulk advanced lpg cylinder electrostatic spraying line, welcome to get quotation from our factory. Quality products and low price are available.

Electrostatic spraying production line, which is suitable for 5kg, 15kg and 50kg LPG cylinders, with a daily production capacity of around 1,200 per eight hours. The length of the drying chamber can be customized according to customer requirements. After the cylinders are cleaned up by shot blasting machine, start the process of spraying and powder curing. The electrostatic spraying production line consists of spraying system, solidification and drying chamber, hanging conveyor system and electric control system. The total power of the entire electrostatic spraying production line is 36 kW. The process of the spraying line is that the cylinder enters the spraying room firstly, and the spraying room is equipped with 2 automatic spraying guns on one side and 3 fixed spraying guns on the top and bottom, totaling 5 spraying guns, which can spray the cylinder in all directions. At the same time, the spray booth is also equipped with filter recovery device, which can increase the recycling of powder. After powder spraying, it enters the solidification and drying chamber, and solidifies about 20 minutes at 180-200°C. The heat of the chamber is generated by the heating system. The heat of the drying chamber is provided by the heating system, the fuel can choose natural gas, liquefied petroleum gas, diesel or biologic grain. If the inspection station is equipped with an combustion furnace's exhaust gas treatment device, the drying chamber can also utilize the residual heat of the device to achieve the purpose of energy saving. Cylinders out of the drying chamber into the cooling line, after cooling, remove the plug for the next step in the cylinder valve loading step.