Valve Disassembling Equipment for Dissolved Acetylene Cylinder

Hangzhou Dongbei Mechanical And Electrical Equipment Co., Ltd. is one of the leading manufacturers and suppliers of valve disassembling equipment for dissolved acetylene cylinder in China, also supports customized service. If you're going to wholesale bulk advanced valve disassembling equipment for dissolved acetylene cylinder, welcome to get quotation from our factory. Quality products and low price are available.

This equipment is mainly used for disassembling cylinder valves of dissolved acetylene cylinders. The equipment adopts the clamping device to clamp the cylinder, and then uses the motor to drive the rotary fixture to unload the valve. The equipment has the functions of automatic positioning and automatic stopping after tightening the valve. This equipment has well structural designed, high quality, safe and reliable performance, low labor intensity, and high efficiency of disassembling cylinder valve.

This equipment primarily uses an electric motor to drive the main shaft rotation, thereby driving the bottle valve clamping fixture rotation to achieve the removal of steel cylinder valves. The functions of each mechanism in the equipment are as follows:

1. Steel cylinder clamping mechanism:
It uses compressed air as power to drive the piston in the cylinder to move back and forth, achieving the clamping and releasing of the steel cylinder;

2. Rotation mechanism:
It is driven by a servo motor to rotate the spindle and fixture, achieving the tightening and loosening of the bottle valve.

3. Spindle clutch lifting mechanism:
The spindle is equipped with a lifting mechanism, universal joint, and spline clutch. Together with the clamp, it can slide up and down. When the clamp is not aligned with the bottle valve outlet, turn the handle to disengage the spline, allowing the clamp to rotate freely. Once the clamp is in the desired position, turn the handle back to engage the spline, and the motor can be started to install or remove the bottle valve.

4. Over-tightening protection mechanism:
It is set within the range of an ammeter and controlled by an overcurrent relay. After the bottle valve is tightened, it automatically stops, not only preventing damage to components and the motor but also ensuring consistent tightening force on the valve, preventing over-loosening or over-tightening.